SKC環氧乙烷采樣器

環氧乙烷是廣泛用于消毒的醫療設備和用品，暴露的健康影響可能從呼吸道癌癥和生殖/致突變作用范圍。

SKC環氧乙烷采樣器功能特點：

• 高度準確和可靠：在實驗室和現場得到廣泛驗證。
• 節省時間和金錢
• 使用相同的吸附劑為活性OSHA方法1010
• 經濟的溶劑解吸，氣相色譜分析
• 選擇合適的吸附劑就沒有反擴散
• *的收集效率
  • 該吸附劑具有較大的比表面積高容量
  • 采樣器包含> 300毫克的材料比其他品牌更
• 采樣的靈活性
  • 驗證了短期和8小時采樣
• 美國SKC采樣器結果證明簡單易用，無需培訓或采樣泵
• 符合ASTM和ANSI / d6246-08 ISEA 104—1998（R 2009）標準
• 確定為可行的替代七OSHA方法取樣

英文資料：

Ethylene Oxide Passive Samplers

Ethylene oxide is widely used to sterilise medical equipment and supplies. Exposure health effects can range from respiratory irritation to cancer and reproductive/mutagenic effects. SKC has scientifically validated the sampling rate of the 575 Series passive samplers along with other critical sampling parameters to meet OSHA/ASTM/ANSI requirements.

• Highly accurate and reliable
  • Proven performers in the laboratory and in the field
• Save time and money
• Uses same sorbent as active OSHA Method 1010
• Economical solvent desorption and GC analysis
• Proper sorbent selection means no reverse diffusion
• Superior collection efficiency
  • SKC sorbents have a larger surface area for higher capacities
  • Samplers contain >300 mg of sorbent — much more than other brands
• Sampling flexibility
  • Validated for short-term and 8-hour sampling
• Proven results
  • Extensively tested and documented
  • Research reports for 20 compounds available
• So easy to use - No sampling pump or training required
• Meets ASTM D6246-08 and ANSI/ISEA 104-1998(r 2009) standards
• Identified as viable alternative to active sampling in seven OSHA methods