UniGo™微流控注射泵（UniGo™ Microfluidic Pump）
備有現貨
UniGo™微流控注射泵是一種能控制流量的單流道壓力泵，在微流控研究中有著廣泛的應用
請致電索取中文介紹和文獻
The UniGo™ Microfluidic Pump is a precision, microfluidic, single-channel pressure pump for a variety of microfluidic applications, where accurate and stable flow rate delivery is required. The pressure pump component is based on controlled air injection. The UniGo™ pump requires a plug-and-play flow sensor for active feedback and increased flow control. SmartFlo Application executed on the iPad mini or LabView based interface communicates with up to 4 UniGo™ Microfluidic Pumps racked together allowing simultaneous control and independent programming of each pump’s flow profile. Uniquely, the UniGo™ may be docked together with the ExiGo™ microfluidic syringe pump combining the best features of both UniGo™ and ExiGo™ in one microfluidic set-up. Note: it is compulsory to purchase a flow sensor with the UniGo pump.
Features:
- 2 modes of pumping: manual flow rate set or preprogrammed flow rate operation.
- Preprogrammed mode includes: Constant, Ramp, Step, Sine functions.
- Wi-Fi communication with iPad mini software.
- USB communication with LabView based PC control software.
- Tactile power switch.
- LEDs for power / status information.
- Side port connections to dock up to 4 pumps (combination of UniGo and ExiGo) into one setup.
- Volumetric flow rates: 1 µL/min – 1 mL/min.
Consumables & Accessories
Biochips
Click to view biochip consumables compatible with the UniGo pump.
Flow Sensors
Click to view flow sensors compatible with the UniGo pump.
Performance Specifications
| Volumetric Flow Rates | 1 µL/min - 1mL/min |
| Flow Direction | Unidirectional (Push) |
| Pulse-free flow rate for microfluidic applications* |
|
| Working Pressure | 30 psi – 2 bars maximum |
| Compressor Options | Internal or external |
| Software Control |
|
| Dimensions | 225mm x 69mm x 122mm (L x W x H) |
| Weight | Approx. 1.3kg |
| Power Requirements | 110 / 220V - 50 / 60Hz - 60W |
*Measured with Flow Sensor and active PID feedback
Flow Sensor (compulsory accessory)
| Operation | Plug and play connection to the UniGo Microfluidic pump |
| Features | Allows monitoring of UniGo pump flow rate and active PID (proportional, integral, differential) feedback of pump flow rate |
| Dead volume | 1 - 25 µL depending on Flow Sensor |
| Measured flow rate changes | See Technical Note on Flow Sensors |
| Max pressure | 30 psi – 2 bars maximum |
| Dimensions / Weight | 60mm (L) x 51mm (W) x 21mm (H) / < 0.1 kg |
| Power Requirements | Via cable to UniGo Microfluidic Pump |
采購中心