您好, 歡迎來到化工儀器網
IEC 60811-2-1測試標準
本頁面標準信息均來源于網絡收集，或由參與標準制定的供應商提供，只作為參考使用，為確保測試結果的準確性、節省您的時間，如需IEC 60811-2-1標準詳細信息或IEC 60811-2-1具體測試方法，歡迎與我們技術人員聯系或給我們留言，我們將為您相關的技術支持。
IEC 60811-2-1標準介紹
IEC 60811-2-1標準簡介
IEC 60811-2-1是關于《電纜和光纜的絕緣和護套材料的通用試驗方法 第2-1部分》，由標準技術委員會20：電線電纜，該版本在原先IEC 60811第二版（1998）的基礎上修訂。
IEC 60811-2-1是關于用于配電光電纜和電信電纜，絕緣聚合物和護套材料的試驗方法，包括在船舶和海上應用中使用的電纜。
該標準給出了適用于彈性體化合物的耐臭氧性試驗、熱定型試驗和礦物油浸試驗方法。
IEC 60811-2-1英文原文摘錄
1.General
1.1 Scope
This standard specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric and optical cables for power distribution and telecommunications, including cables used on ships and in offshore applications.
This standard gives the methods for the ozone resistance test, hot set test and mineral oil immersion test, which apply to elastomeric compounds.
1.2 Normative references
The following normative documents contain provisions which, through reference in this text,constitute provisions of this part of IEC 60811. At the time of publication, the editions indicated were valid. All normative documents are subject to revision, and parties to agreements based on this part of IEC 60811 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
IEC 60811-1-1:1993, Common test methods for insulating and sheathing materials of electric cables – Part 1: Methods for general application – Section 1: Measurement of thickness and overall dimensions – Tests for determining the mechanical properties
IEC 60811-1-2:1985, Common test methods for insulating and sheathing materials of electric cables – Part 1: Methods for general application – Section Two: Thermal ageing methods
ISO 1817:1999, Rubber, vulcanized – Determination of the effect of liquids
2 Test values
Full test conditions (such as temperatures, durations, etc.) and full test requirements are not specified in this standard; it is intended that they should be specified by the standard dealing with the relevant type of cable.
Any test requirements which are given in this standard may be modified by the relevant cable standard to suit the needs of a particular type of cable.
▼IEC 60811-2-1第三方檢測機構
IEC 60811-2-1PDF資料
以上標準信息來自互聯網搜索整理，如需了解完整的IEC 60811-2-1的信息或IEC 60811-2-1標準解讀，歡迎詳詢。