CRG-03-04-50,日本YUKEN油研遙控溢流閥

Remote Control Relief Valves
DT / DG-01
Threaded Connections / Sub-plate
Instructions
Pressure is limited by collars fitted. If a working pressure cannot be attained,
remove some collars. One collar is equivalent to 10 MPa (1450 PSI).
If the internal volume of the vent line is too large, chattering is likely to occur.
閥型號
號碼
六角螺栓
日本的標準。 “JIS"和歐洲的設計標準。 N.美國設計標準。
DG-01 M5×45 B4。 0-24UNC×1-3/4 B4。 4
數量。
安裝螺栓
附件
Approx.
Mass
kg (lbs.)
Valve Model
Numbers
DG-01
Japanese Standard "JIS" European Design Standard N. American Design Standard
Sub-plate
Model Numbers
Thread
Size
Sub-plate
Model Numbers
Thread
Size
Sub-plate
Model Numbers
Thread
Size
DGM-02-20 Rc 1/4 DGM-02-2080 1/4 BSP.F DGM-02-2090 1/4 NPT 0.7 (1.5)
Sub-plate
Sub-plates are available. Specify the sub-plate m odel num ber from the table above.
 When sub-plates are not used, the m ounting surface should
have a good m achined finish.
Sub-plates are available. Specify the sub-plate model num ber from the table above.
When sub-plates are not used, the mounting surface should
have a good m achined finish.
CRG-03-04-50,日本YUKEN油研遙控溢流閥