Objective Heater帶溫度的物鏡加熱器

Objective Heater帶溫度的物鏡加熱器

帶溫度的物鏡加熱器

控制器用于任何目的的硅橡膠加熱器。與浸油或浸水光學元件一起使用。內置溫度

傳感器。易于安裝和拆卸。只需將加熱器包裹在目標上，并用附帶的

尼龍搭扣帶。訂購時寬度/高度。加熱器通常連接在

圓柱面

更接近樣本。項目#：MTC-HLS-025

•尺寸：0.5英寸。寬的

x 5英寸長

•溫度穩定性：0.01°C，自我調節，

內置傳感器；雙重過熱保護

•雙重過熱保護：調節

功率輸出降至0W；設置消除

溫度超調

門檻

物鏡加熱器•易于安裝：適合任何物鏡

目錄號說明

MTC-HLS-025單通道溫度控制器目標加熱器

TC-HLS-05目標加熱器升級

Objective Heater with Temperature

Controller A flexibl silicone heater for any objective. Used with oil or water immersion optics. Built-in temperature

sensor. Easy to attach and remove. Simply wrap the heater around objective and secure with included

Velcro tape. Specify the width/height when ordering. The heater is usually attached to

a cylindrical surface

of the objective, closer to the sample. Item#: MTC-HLS-025

• Dimensions: 0.5in. wide

x 5in long

• Temperature stability: 0.01°C, self-adjusting,

built-in sensor; dual overheating protection

• Dual overheating protection: regulated

power output down to 0W; settings eliminate

temperature overshoot; adjustable temperature

threshold

Objective heaters • Easy to install: Fits any objective

Catalog No. Description

MTC-HLS-025 Objective Heater with 1-channel temperature controller

TC-HLS-05 Objective Heater upgrade

 注：楊清辰發布