High stability Precision單通道高穩定精度

High stability Precision單通道高穩定精度

單通道高穩定精度

溫度控制器TC-1-100s一種簡單的控制器，適用于不需要多個溫度探頭的應用：目標

加熱器，注射器加熱器，加熱玻璃板，和其他簡單的配置，易于使用和靈活

穩定運行的自我調節控制。連接到可選外部探頭（槽）。在存儲器中存儲不同樣本大小/加熱元件（例如，不同大小目標）的兩個設置，

也可以用來產生快速的溫度階躍。

無電噪音

內置過熱保護

成像和記錄期間無振動-無內部風扇

待機模式

大多數加熱階段作為在線溶液預熱器工作?？捎糜趂lo控制和灌注

系統。包括連接電纜和100-240VAC電源：12V輸出適用于大多數

小型加熱元件和目標加熱器（提供18V和24V輸出）。

•溫度傳感器：內置內部加熱

元素

•到150°C

0.1攝氏度

•溫度穩定性：0.01°C，自我調節，

敏感應用需要：

納米/壓電定位，共焦成像

設置：柔韌和自我調節，允許

穩定不同樣品的溫度

容積和加熱級尺寸

•溫度探頭（可選）：微型

0.87mm（適用于小容量腔室）

•反饋：階段傳感器

•輸出：大5A，165W

Single channel High stability Precision
Temperature Controller TC-1-100s A simplifie controller suitable for application where multiple temperature probes are not required: objective
heaters, syringe heaters, heated glass plates, and other simple configurations Easy to use and flexibl
self-adjusting controls for stable operation. Connection to an optional external probe (bath). Stores twosettings in its memory for different sample sizes/heating elements (different size objectives, for example),
which can also be used to generate fast temperature steps.
No electrical noise
Built-in overheating protection
No vibrations during imaging and recording - no internal fan
Standby mode
Most heating stages work as inline solution pre-heaters. Can be used with flo control and perfusion
systems. Includes the connecting cable, and 100-240VAC power supply: 12V output is suitable for most
small heating elements and objective heaters (18V and 24V output available).
• Temperature sensor: built-in inside heating
elements
• Range from room to 150°C with accuracy
0.1°C
• Temperature stability: 0.01°C, self-adjusting,
required for sensitive applications:
nano/piezo positioning, confocal imaging
• Settings: flexibl & self-adjusting, allow
to stabilize temperature in different sample
volumes and heating stage sizes
• Temperature probe (optional): miniature
0.87mm (fit small volume chambers)
• Feedback: Stage sensor
• Output: 5A max, 165W

 注：楊清辰發布