Delivery System小容量輸送系統SVDS2

Delivery System小容量輸送系統SVDS2

小容量輸送系統SVDS2，用于標準15ml管，來自

薩斯特德。該系統采用8根圓錐底1/16英寸的小塑料管。O、 D.聚四氟乙烯管

連接到液體輸送設置。帶有溶液的管子只需擰入保持架即可。

在實驗過程中，溶液很容易補充。需要加壓氣體來輸送溶液?？梢允?/p>

與微型流形ZMM、灌注系統和壓力控制器一起使用。解決方案也可以是

使用控制流量或真空系統退出?？捎糜诔槲?/p>

該系統配備了所有必要的管道和配件，以連接到一個單一的壓力源。小的

尺寸為200x25x25mm（不帶管）可將溶液放置在樣品附近?？梢允?/p>

附著在1英尺的地方。。桿（包括在內）。帶有X形塊，可連接到標準0.5英寸。站起來。包括

可更換塑料管15ml，聚四氟乙烯管，配件和連接到壓力源的管

所提供的配件允許您將導管直接連接到灌注系統的閥門，并且輸出

從閥門直接到閥組或定制管道和閥室。我們所有的流形都可以連接，

包括零死容量、luer鎖和用于單細胞灌注的微型管匯。顯示在

圖為SVDS2系統與PS-8H夾管閥連接設置。SVDS2的輸出然后轉到

ZMM流形提供液體輸送和溶液交換，在培養皿內插入PDI。

通過MTH-S支架的吸入管提供流出。物品#：SVDS2

 Small Volume Delivery System SVDS2 For use with standard 15ml tubes from
Sarstedt. This system utilizes eight small plastic tubes with conical bottom and 1/16in. O.D. PTFE tubing
to connect to your setup for liquid delivery. Tubes with solutions are simply threaded into the holder.
Solutions are easy to refill during the experiment. Requires pressurized gas to deliver the solutions. Can be
used with miniature manifolds ZMM, perfusion systems, and pressure controllers. Solutions can be also
withdrawn using controlled flow or vacuum systems. Can be used to collect samples by aspiration
The system comes with all necessary tubing and fitting to connect to a single pressure source. The small
size of 200x25x25mm (without tubes attached) allows to position solutions near your sample. Can be
attached to a 1 ft.. rod (included). Comes with X-block to attach onto a standard 0.5 in. stand. Includes
replaceable plastic tubes 15ml, PTFE tubing, fitting and tubing to connect to a pressure source
Provided fitting allows you to connect tubes directly to the valves of perfusion systems, and the output
from valves directly to the manifolds or custom tubing and chambers. All our manifolds can be connected,
including zero-dead volume, luer-lock, and miniature manifold for single cell perfusion. Shown on the
picture, is SVDS2 system connected to the pinch valves of PS-8H setup. Output from SVDS2 then goes to
ZMM manifold to provide liquid delivery and solution switching inside a Petri dish with PDI insert inside.
The outflow is provided through a suction tubing of MTH-S holde . Item#: SVDS2

 注：楊清辰發布