Solutions加壓/充氧溶液的鋼瓶

Solutions加壓/充氧溶液的鋼瓶

用于加壓/充氧溶液的鋼瓶，一套8個一套的高壓滅菌器

給你的溶液加壓。可用于驅動溶液通過100微米的毫米

例如，歧管。也可以通過給一根細管注入氣體使溶液飽和（冒泡）

在汽缸里。配有截止閥和1/16英寸的配件。一、 D.油管。包括一個單向閥

連接到壓力源、釋放壓力、重新加注氣缸或連接到

氣體混合物（例如氧化作用）。配有螺紋蓋，便于重新加注。材質：polypr-

派琳。訂購時卷。大容量650ml可根據要求提供。帶

還提供內置10、25或40微米過濾器（訂購時）。容量高達100毫升，適合

我們的SH注射器支架。物品#：PC

Cylinder to Pressurize/Oxygenate Solutions, Set of 8 A set of autoclavable
cylinders to pressurize your solutions. Can be used to drive solutions through 100 micron tip of MM
manifold, for example. Can be also used to saturate solutions with gases (bubbling) by feeding a thin tubing
inside the cylinder. Comes with stop-cocks and fitting for 1/16 in. I.D. tubing. Includes a 1-way valves
to connect to a pressure source, to release the pressure, to refill the cylinde , or to connect to a source of
gas mixture (oxygenation, for example). Comes with threaded cover for easy refill. Material: polypr -
pylene. Specify volume when ordering. Large 650ml volumes are available upon request. Cylinders with
built-in 10, 25 or 40 micron filters are also available (specify when ordering). Volumes up to 100ml fit to
our SH syringe holders. Item#: PC

 注：楊清辰發布