Pressure manifold壓力歧管

Pressure manifold壓力歧管

氣體混合物輸送適配器-壓力歧管

用于注射器固定器的適配器，用于在實驗期間連接到氣體源以飽和/起泡八種溶液

（二氧化碳飽和或充氧，或加壓溶液）配有X-塊，適合0.5英寸。

帖子。包括9個停止旋塞和塞子，用于關閉未使用的通道或公共入口。它還附帶

連接到輸出倒鉤的管子和配件，以及在溶液中形成氣泡的細管子。可以是

與石頭或任何其他擴散器一起使用，以產生更大體積的氣泡。也可以用來給溶液加壓

通過連接到壓力缸，PC.可以連接到另一個適配器以使用相同的氣體源

混合物/壓力。。項目#：SH-A

壓力控制器

目錄

編號說明

PC-R10壓力控制器，可調高達7.5PSI-385毫米汞柱

-輸出。

PC-R15壓力控制器，可調高達15PSI-775 mm Hg

-輸出，無調節真空

PC-100-25壓力調節器，可調高達30PSI輸出

PS-V8P 8通道壓力歧管開關

PS-8P可編程8通道液體輸送系統

svds2小容量灌注系統

帶壓力開關的svds2-P小容量灌注系統

PC-10氣缸，用于加壓/充氧溶液，10毫升，一套8個

PC-50加壓/充氧溶液瓶，50ml，8套

SH-A氣體混合物輸送適配器

 Gas Mixture Delivery Adapter - Pressure manifold
Adapter for syringe holders to connect to a gas source to saturate/bubble eight solutions during experiments
(CO2 saturation or oxygenation, or pressurizing the solution.) Comes with X-block to fit 0.5 in.
posts. Includes 9 stop-cocks and plugs to close unused channels or the common inlet. It also comes with
tubing and fitting to connect to output barbs and thin tubing to form bubbles inside the solutions. Can be
used with stones, or any other diffuser, to bubble larger volumes. Can be also used to pressurize solutions
by connecting to pressure cylinders PC. Can be connected to another adapter to use the same source of gas
mixture/pressure.. Item#: SH-A
Pressure Controllers
Catalog
No. Description
PC-R10 Pressure controller, adjustable up to 7.5PSI - 385 mm Hg
- output.
PC-R15 Pressure controller, adjustable up to 15PSI - 775 mm Hg
- output, unregulated vacuum
PC-100-25 Pressure regulator, adjustable up to 30PSI output
PS-V8P 8-Channel pressure manifold-switch
PS-8P Programmable 8-channel liquid delivery system
svds2 Small Volume Perfusion System
svds2-P Small Volume Perfusion System SVDS2 with pressure switch
PC-10 Cylinder to pressurize/oxygenate solutions, 10 ml, set of 8
PC-50 Cylinder to pressurize/oxygenate solutions, 50ml, set of 8
SH-A Gas Mixture Delivery Adapter

 注：楊清辰發布