Dosing System4通道可編程加藥系統CFPS-2

Dosing System4通道可編程加藥系統CFPS-2

4通道可編程加藥系統，CFPS-2

•流量控制：手動撥號，模擬信號（-5）

-+5V），通過RS232/USB進行軟件控制

端口，反向

•遙控：無線通道開關

打開/關閉并啟動編程序列

•計時器：1秒精度，多超過

每個頻道24小時

•可編程音量：可編程

輸送量高達999.9ml

•可編程序列：可編程

按順序激活通道

具有可編程延遲

•連續交付：可編程為

定容連續輸送液體/

時間和期限

•尺寸：4x2.5x1.85英寸。

•電源：110/230VAC

•安裝：0.5英寸。1英尺桿和x形塊

•配件：帶刺魯爾鎖

•蠕動管：0.015英寸。一、 直徑：0.020英寸。

一、 直徑；0.031英寸內徑；0.062英寸。一、 直徑：0.093英寸。一、 D。

這是一個雙通道灌注系統，用于控制溶液流速從8微升/分鐘到7.3毫升/分鐘

（或選擇下面的升級，以獲得高22ml/min的不同流速）。包括4通道可編程

控制器，允許升級到4通道系統。精密設計，縮小尺寸

提供平滑灌注的脈動。設計用于在

成像、記錄、鈣和其他離子測量、生化分析或小器官和動物

灌注。用于實驗室芯片設置、成像和記錄工作站中的小腔室。

數字接口和模擬輸入允許您獨立校準每個通道并應用一個或

通過手動或通過數據采集和成像軟件切換通道的多種物質。

控制器可使用每個頻道的定時器進行編程，或分配預設音量。它也

4-Channel Programmable Dosing System, CFPS-2
• Flow control: manual dial, analog signal (-5
- +5V), software control through RS232/USB
port, reverse direction
• Remote control: wireless channel switch
ON/OFF and to start programmed sequences
• Timers: 1sec accuracy, up to more than
24hours for each channel
• Programmable Volume: Can be programmed
to deliver volumes, up to 999.9ml
• Programmable Sequences: Can be programmed
to activate channels in sequences
with programmable delays
• Continuous Delivery: Can be programmed to
deliver liquid continuously with set volume/
time and period
• Dimensions: 4x2.5x1.85 in.
• Power: 110/230VAC
• Mounting: 0.5in. 1 ft. rod and x-block
• Fitting: barbed luer-locks
• Peristaltic Tubing: 0.015in. I.D.; 0.020in.
I.D.; 0.031in I.D.; 0.062in. I.D.; 0.093in. I.D.
This is a 2-channel perfusion system for precise control of solution flow rate from 8 µl/min to 7.3 ml/min
(or choose upgrades below for different flow rates up to 22ml/min). Includes a 4-channel programmable
controller, which allows upgrade to a 4-channel system. Precision design and miniature size minimize
pulsations to provide smooth perfusion. Designed for stable solution flow or substance application during
imaging, recording, calcium and other ions measurement, biochemical assays or small organs and animals
perfusion. Used with small chambers in lab-on-chip setups, imaging and recording workstations.
Digital interface and analog inputs allow you to calibrate each channel independently and to apply one or
multiple substances by switching channels manually or through data acquisition and imaging software.
The controller can be programmed using timers for each channel, or to dispense preset volumes. It also allows to program continuous sequence of solution applications, which can be used to replenish liquid
media during long-term experiments. You can accurately mix different solutions or generate dose-response
curves using only two solutions: buffer and concentrated test compound.
Each channel can be controlled through wireless remote, manually, by analog signal, TTL or through
RS232 connection for fully automated setups controlled through third party software packages (optional
USB adapters are also available).
The system can be upgraded to operate up to 4 channels in parallel. Can be connected to solution switching
miniature systems for changing and mixing solutions in sequence. The optional luer-lock manifolds
will combine multiple solutions into a single output. The size of the 2-channel system is 4x2.5x1.85 in
(separate from the controller). Multiple systems cad be attached to each other to form a multi-channel
system. Includes 1 ft. mounting rod and X-block to attach a standard 0.5in. posts. Comes with a set of tubing
for different flow ranges: 0.015” I.D. - 8-170 µl/min; 0.020” I.D. - 20-340 µl/min; 0.031” I.D. - 50-920
µl/min; 0.062” I.D. - 170-3400 µl/min; 0.093” I.D. -370-7300 µl/min; dual 0.015” I.D. x2 8-170 µl/min
(for different ranges select upgrades below). Includes 4-channel controller Item#: CFPS-2

 注：楊清辰發布