奧林巴斯GLIDER（滑動）掃查器

手動x - y掃描儀

滑翔機X-Y掃描儀是一個2軸編碼掃描儀，用于手動檢查輕微彎曲或平坦的復合表面。該掃描儀非常適合光柵掃描與以下技術:

常規超聲學(UT)

相控陣超聲(PAUT)

渦流(EC)

渦流陣列(ECA)

常用的檢查材料包括復合材料和鋁，使用吸盤式分離盒;和碳鋼，使用可選的磁性吊艙。

Manual X-Y Scanner

The GLIDER X-Y Scanner is a 2-axis encoding scanner for the manual inspection of slightly curved or flat composite surfaces. The scanner is well suited for raster scanning with the following technologies:

• Conventional ultrasonics (UT)
• Phased array ultrasonics (PAUT)
• Eddy current (EC)
• Eddy current array (ECA)

Commonly inspected materials include composites and aluminum, using suction-cup pods; and carbon steel, using optional magnetic pods.

Design Characteristics

奧林巴斯GLIDER（滑動）掃查器

設計特點

x軸連接到兩個安裝吊艙。根據檢驗材料的不同，可以使用以下一種型號:

吸盤安裝吊艙(含)

磁性安裝吊艙(選配)

有兩個編碼器模塊(每個軸上一個)來測量探頭的位置。這些模塊的位移可以在3.27毫米的步驟，自由運行，或鎖定。

掃描儀有三種格式(18 。,24 。和36 。),根據所需的掃描范圍:

滑翔機18 x 18

滑翔機24乘24

滑翔機36 x 36

The X-axis is attached to two mounting pods. Depending on the material to inspect, one of the following models can be used:

• Suction-cup mounting pod (included)
• Magnetic mounting pod (optional)

There are two encoder modules (one on each axis) to measure the probe position. The displacement of these modules can be in 3.27 mm steps, free running, or locked.

The scanner comes in three formats (18?in., 24?in., and 36?in.), depending on the scan coverage needed:

• GLIDER 18 x 18
• GLIDER 24 x 24
• GLIDER 36 x 36

滑翔機掃描套件包括:

兩個跟蹤期望的中風(18 。,24 。或36 。，視乎型號而定)

兩個displacement-encoding模塊

兩個吸盤安裝吊艙

5米編碼器電纜兼容OmniScan儀器

相控陣軛架(40毫米)

TOFD/PE軛架(31.75 mm)

90°探頭支架安裝支架

180°探頭支架安裝支架

帶有彈簧的探頭支架

灌溉管件

艱難的手提箱

GLIDER Scanner Kit Includes:

• Two tracks for desired stroke (18?in., 24?in., or 36?in., depending on the model)
• Two displacement-encoding modules
• Two suction-cup mounting pods
• 5 m encoder cable compatible with OmniScan instruments
• Phased array yoke (40 mm)
• TOFD/PE yoke (31.75 mm)
• 90° probe holder mounting bracket
• 180° probe holder mounting bracket
• Probe holder bearing arm with springs
• Irrigation tubing and fitting
• Hard carrying case

Options

Magnetic Mounting Pods
Magnetic mounting pods enable use on ferromagnetic surfaces (part number GLIDER-A-01)
Tracks
18?in., 24?in., or 36?in. tracks are available as options.
Manual Water Pump Kit
Water pump is compatible with scanner umbilical cables. It can also be used with provided tubing. Includes tank, tubing, and Y-splitters (part number OPIX105).
Electric Water Pump Kits
The CFU-03 and CFU-05 are portable electric pump units used to supply couplant to wedges during ultrasonic inspections.